The MAX17643 is a 4.5V–60V, 2A, high-efficiency, synchronous step-down DC-DC converter with internal compensation

The imalaya family of regulator ICs, power modules and chargers enables cooler, smaller and simpler power solutions. The MAX17643 high-efficiency, high-voltage, Himalayan synchronous step-down DC-DC converter integrates MOSFETs and operates from a 4.5V to 60V input range. The AD650KN converter can source up to 2A and generate 0.9V to (0.9 x V IN)V. The feedback (FB) voltage is accurate to ±1.4% from -40°C to +125°C. Built-in compensation over the output voltage range eliminates the need for external components. The MAX17643 uses a peak-current-mode control architecture that operates in a fixed-frequency forced PWM mode. The current-limit setting of the MAX17643 allows the device to deliver up to 2A of peak load current. This enables the device to support pulsed load applications such as communication modules with minimal output voltage drop. The MAX17643 has a short minimum on-time, enabling high switching frequencies and a small solution size.

The device is available in a 12-pin (3mm × 3mm) TDFN package. Provides simulation models.

Simplified block diagram:

Main features:

●Reduce external components and overall cost

- No Schottky synchronization operation

— Internal compensation for any output voltage

— All ceramic capacitors, compact layout

●Reduce the number of DC-DC regulators in stock

—4.5V to 60V wide input

—Adjustable 0.9V to (0.9 × V IN ) output

—Up to 2A peak load current

— 400kHz to 2.2MHz adjustable switching frequency with external synchronization

●Reduce power consumption

—91.6% peak efficiency

— Assisted bootstrap LDO for increased efficiency

—4.65µA Shutdown Current

● Reliable operation in adverse industrial environments

- Hiccup mode overload protection

- Adjustable soft start

—Built-in output voltage monitoring Restart

—Programmable EN/UVLO thresholds

— Monotonic startup to pre-biased load

- Over temperature protection

—Wide industrial -40°C to +125°C ambient operating temperature range/-40°C to +150°C junction temperature range

— Complies with CISPR22 (EN55022) Class B conducted and radiated emissions

Application/Use:

●Industrial control power supply

●Universal point of load

●Distributed supply regulation

●Base station power supply

●Wall transformer regulation

●High voltage single board system

●Pulse load application

●Communication module

parameter:

V IN (V) (min): 4.5

V IN (V) (max): 60

VOUT1 (V) (min): 0.9

V OUT1 (V) (max): 54

I OUT1 (A) (max): 2

Switch Type: Internal

Sync switching: yes

Power Good Signal: Yes

ICC (mA) (typ.): 5.65

# DC-DC output: 1

Switching frequency (kHz): 400

Design Tool: Electronic Simulation

Package/Pin: TDFN-CU/12